||Great storage shed once it's built but be prepared to take your time. It took 2 of us 5 hours from start to finish & about another 45 minutes to build the floor frame and cut the plywood. About 6 hours total.
I suggest first taking all parts out of the box and laying them out with their part numbers facing up.
This will make it easy to find the specific parts when assembling specific sections.
The parts have labels on them as well as part numbers stamped into the pieces.
Do not deviate from the assembly instructions.
Follow them in the exact sequence laid out in the instructions and pay CLOSE ATTENTION TO THE PICTURES, specifically which way the holes are facing.
Don't over tighten the sheet metal screws.
Getting the screws in to plastic pieces do take some effort. Be careful not to strip the screw heads.
Getting the 2 sides of the roof to come together took some effort when installing the roof side pieces and roof center pieces as itâ€™s a very tight fit.
I used up about 2 tubes of clear silicon to seal the edges inside the shed, roof buttons and roof edges.
Overall, the shed is nice and sturdy. It's been raining for a couple days and no leaks.
Rating: [5 of 5 Stars!]